In interior design, flooring is a very important aspect especially in a factory. The reason for this is due to the fact that floors in factories are subject to wear and tear. Since it covers a wide region, the choice of flooring is very important as it is a major investment. The most widely adopted flooring options for this niche is epoxy flooring. Its characteristics such as durability, minimum maintenance and environmental friendliness, make it more preferred by many. For residential and commercial purposes, the epoxy flooring is widely used. On top of concrete walls, epoxy floor coatings are usually applied due to their great binding capabilities and attractiveness.
Catalyzing of a certain type of plastic forms epoxy. It is generally a resin. It consists of the Bis phenol- A and polyamine compounds. Dr. Pierre Castam, a Swiss scientist developed the Epoxy resin in the 1930’s. The contact between the resin and the hardener causes a catalytic reaction. A very strong chemical crosslink is formed when the two bind together. After a short period of time, epoxies can be recoated as the binding technology enables this. Epoxy flooring comes in three main types. The three types of epoxy flooring are 100% solid epoxy, solvent based and water based epoxies. The best type of epoxy flooring among the three is the 100% solid epoxy. The water and solvent based epoxies are usually user friendly, however, they are not durable and cannot be used for thick coating like the 100% solid ones. The requirements needed in the designing of industrial floors are all met by the use of solid epoxies. Click here for more info about epoxy flooring.
The characteristics of epoxy floorings are their excellence in chemical resistance, strength and their tough nature. Abrasion resistance, waterproof, heat resistance and resistance to chemical corrosives are its additional qualities. They can be used in the flooring of residential places and children play areas because they are toxic free when dry. A couple of steps are followed in the practical application of flooring. Mixing of the compounds is done in proper ratios then applied on the floor to a minimum depth of 2mm. Seven coats are needed in epoxy flooring to achieve a finished surface that is glossy. The base coat, one or two epoxy coats, broadcast coats of sand that is colored or flakes and a top coat are the types of coats. To know more about epoxy flooring, visit https://www.britannica.com/topic/epoxy.
The ease of maintenance is the main advantage of epoxy flooring. The best solution in the protection of concrete walls is the epoxy flooring that is abrasion resistant, chemical resistant and protects against thermal shock. These are the experiences the floor may undergo in an industrial set up. The advent of technology is seen to create extensive opportunities of application of epoxy flooring solutions. Click here if you have questions.